Clinton Boulevard sidewalk study planned
By Randy Bell
Imagine being able to take a safe, leisurely stroll from Clinton’s Olde Towne District or Mississippi College all the way to Lakeview Drive – with the key word being “safe.” Not counting a couple of short segments in the Clinton Plaza area, pedestrian sidewalks end just east of the Clinton Parkway. But a study is getting underway that could qualify the City for State money to extend the sidewalks.
Consulting City Engineer Bill Owen says it’s been a longtime goal of Main Street Clinton and the Clinton Boulevard District to have such a pedestrian connection.
“This is one way to do it,” Owen says. “There’s an application process that’s opening up in August with MDOT.”
What’s being considered would require a modification of Clinton Boulevard.
“Based on the guidelines, [the sidewalks] have to be a certain distance off the edge of the pavement,” Owen says. “Without relocating utilities, specifically power [lines] overhead, there’s not enough room along Clinton Boulevard.”
Owen says the solution could be what’s called a “road diet,” with part of the street repurposed for sidewalks.
“That’s looking at sections of road that might be, in this case, a three-lane road that they could reduce to two lanes, if the traffic allowed for that. [Then, they’d] be able to put sidewalks in the areas down through there by shrinking the width of the road.”
But before that can be done, the City needs to determine the traffic impact of a street without a center turn lane.
“Until we do a traffic study to justify that, we wouldn’t attempt to [proceed], wanting to make sure that there is not traffic now or projected future traffic that would need a three-lane [street].”
The Board of Aldermen voted June 6 to spend $9,700 for a traffic analysis along Clinton Boulevard between East College Street and Morrison Drive. A Madison company, Kiser Traffic and Engineering, will do peak hour traffic counts at three intersections and at the Clinton Plaza driveways and will develop a sidewalk concept.
The Board also approved a $16,000 contract with Tice Engineering of Wiggins for an aerial drone topographic survey along College Street and Clinton Boulevard to be used in the preliminary design of possible street modifications.
Owen says the survey is needed “to get a jump start on the application” for the MDOT money.
He says using a drone has some advantages.
“It’s probably a little bit quicker and a little bit cheaper to do it like that,” said Owens. “There’ll still be some conventional surveying that’ll have to take place.”
Main Street Clinton Director Tara Lytal says she is happy to see the City moving ahead.
“The Clinton Boulevard project is one that Main Street has been advocating for many years,” Lytal wrote in an email. “We believe the project is important to our community for reasons which include safe access from the Clinton Parkway to Lakeview Drive. The area is heavily traveled, and there is not currently a safe route for pedestrians and cyclists. It is our hope that these studies are the first step in getting a comprehensive plan to provide sidewalks in the study area.”
Mayor Phil Fisher says the survey and study will help to create a “shovel ready” project for MDOT to consider.
“If you show up and you’ve got a project, it’s drawn out—and you can walk out of that room and bid it the next day, technically—that’s what they want to see,” explained Fisher.
Fisher says sidewalk improvements in Clinton begin with maintenance of what’s already there.
“And we’ve been doing that on sidewalks as we can,” he said. “And then you’ve just got to pick a direction and say ‘what can benefit the most people?’”
For now, City leaders say that could mean eventual sidewalks along Clinton Boulevard, and a future project may focus on Northside Drive.
The mayor says, “I’d love to see Northside Drive [sidewalks] go all the way from Traceway Park to Lovett [Elementary].”
